

United States (US)
Product | Subtotal |
---|---|
![]() | $2,500.00 |
Subtotal | $2,500.00 |
Standard Delivery | Enter your address to view shipping options. |
Tax | $206.25 |
Total | $2,706.25 |
By clicking Bank Payment, you authorize Modtub to debit the bank account you select for any amount owed for charges arising from your use of Modtub services and/or purchase of products from Modtub, pursuant to Modtub website and terms, until this authorization is revoked. You may amend or cancel this authorization at any time by providing notice to Modtub with 30 (thirty) days notice.
Your personal data will be used to process your order, support your experience throughout this website, and for other purposes described in our privacy policy.
By Purchasing From MODTUB, LLC, You Agree to The Following Terms and Legal Agreements
Electrical Requirements
Most spas need a dedicated 220-volt/50-amp, GFCI-protected power source (4 wires: 2 hot, 1 neutral, 1 ground.) Use 6 or 8-gauge copper wire only. Electrical hook-up is the responsibility of the buyer and should be performed by a licensed electrician. All electrical and installation work must comply with National Electrical Code and any other building, city, county, etc. code requirements.
Surface and Pad Requirements
Spas require a uniform surface that is firm and flat. (Ex. 4” thick cement slab, properly designed deck, gravel bed, EZ Pad, etc.) The bottom of the spa must be completely in contact with the foundation you have prepared. Any gaps under the spa may cause damage not covered under warranty. Sprinklers near the spa should be adjusted/capped off. Consult a licensed contractor before installing any type of platform.
Access and Clearance
For most deliveries, a minimum of 40” clearance through gates is required, as well as between the house and side fences, and a minimum overhead clearance of 96”. For exact clearance requirements, ask your salesperson. It may be necessary for you to remove a gate or section of the fence prior to delivery to provide adequate clearance. Measure the areas between obstructions (rain gutters, meters, air conditioners, low-hanging roofline, tight corners, etc.) Anything limiting access to the site must be removed prior to delivery. Any trimming of trees, bushes, removal of debris or snow, leveling of ground, or other preparation must also be done prior to the delivery and is the responsibility of the buyer. If hauling away or disposing of the existing spa, it must be completely drained, disconnected, and free-standing. Adequate space must be available to safely remove the old spa. Delivery personnel will have the final say if it’s safe to attempt. Please measure carefully and call your dealer for any concerns prior to delivery.
Spa Delivery Procedure
IMPORTANT TERMS AND CONDITIONS
By Purchasing From MODTUB, LLC, You Agree to The Following Terms and Legal Agreements
Electrical Requirements
Most spas need a dedicated 220-volt/50-amp, GFCI-protected power source (4 wires: 2 hot, 1 neutral, 1 ground.) Use 6 or 8-gauge copper wire only. Electrical hook-up is the responsibility of the buyer and should be performed by a licensed electrician. All electrical and installation work must comply with National Electrical Code and any other building, city, county, etc. code requirements.
Surface and Pad Requirements
Spas require a uniform surface that is firm and flat. (Ex. 4” thick cement slab, properly designed deck, gravel bed, EZ Pad, etc.) The bottom of the spa must be completely in contact with the foundation you have prepared. Any gaps under the spa may cause damage not covered under warranty. Sprinklers near the spa should be adjusted/capped off. Consult a licensed contractor before installing any type of platform.
Access and Clearance
For most deliveries, a minimum of 40” clearance through gates is required, as well as between the house and side fences, and a minimum overhead clearance of 96”. For exact clearance requirements, ask your salesperson. It may be necessary for you to remove a gate or section of the fence prior to delivery to provide adequate clearance. Measure the areas between obstructions (rain gutters, meters, air conditioners, low-hanging roofline, tight corners, etc.) Anything limiting access to the site must be removed prior to delivery. Any trimming of trees, bushes, removal of debris or snow, leveling of ground, or other preparation must also be done prior to the delivery and is the responsibility of the buyer. If hauling away or disposing of the existing spa, it must be completely drained, disconnected, and free-standing. Adequate space must be available to safely remove the old spa. Delivery personnel will have the final say if it’s safe to attempt. Please measure carefully and call your dealer for any concerns prior to delivery.
Spa Delivery Procedure
IMPORTANT TERMS AND CONDITIONS